RFID | AutoID | Internet of Things IOT | Automatic Vehicle Identification | Electronic Vehicle Registration

RTLS!START SW

Kathrein supplies a free configuration and installation software called "RTLS!Start" with each RTLS Node and Transponder Reader for easy to start application development. All management parameters of the K-RTLS Node, such as the IP address setting, can be configured as well as all RTLS specific values to prepare the Node for its application.

The RTLS!Start software is the Swiss army knife for using the Kathrein RTL system.

RTLS!WIZARD SW

With the RTLS!Wizard SW, Kathrein provides a simple tool to introduce users and interested parties to the topic of RTLS. With a guided tutorial the nodes and the transponders are automatically configured and tested. In addition, any floor plan can be read in as a basis for displaying the localization results. This map shows the nodes and the movements of the transponders for all operating modes.

DEMO-SW RTLS!WIZARD 1.00.00.243

for all Kathrein RTLS Node and Transponder

As of 22.11.2022 | Download as zip-File | 5.7 MB

RTLS NODE FIRMWARE

The firmware includes the current version of the K-RTLS node and is used to connect the calculation of the localization results and the transfer to a higher control level. The localization results with all system, data and diagnostic commands and their responses are transferred.

K-RTLS NODE FIRMWARE 1.0.0.20

for all Kathrein RTLS Node

as of 22.11.2022 | Download as bin-File | 222 kB

RTLS TRANSPONDER FIRMWARE

The firmware includes the current version of the K-RTLS transponder and is used to transmit the raw localization data to the K-RTLS nodes. The raw localization data with all system, data and diagnostic commands and their responses are transmitted.

K-RTLS TRANSPONDER FIRMWARE 1.0.0.0

for all Kathrein RTLS transponders

As of 22.11.2022 | Download as bin-File | 145 kB